A company has the following available drive types in their Dell EMC Unity 500 storage array:
What combination of drives can the company use to create a storage pool?
What is one method that is used to verify an ESRS configuration?
Where can Unity Compression be enabled?
What is a connectivity rule for a host that connects to multiple Dell EMC Unity systems?
What is the maximum number of LUNs in a Consistency Group?
What can be used to initially configure a static management IPv6 address on a Dell EMC Unity array?
While examining the health status of a Dell EMC Unity array, the administrator notices the internal SSD is in a faulted state.
Which condition caused this fault?
What features are available with Dell EMC UnityVSA?
A company plans to add five drives to a 30 drive SAS Flash 4 All-Flash pool on a Dell EMC Unity XT 600 storage array. Which drive type(s) can be used for the expansion?
What is an advantage for selecting Centralized ESRS over Integrated ESRS?
What is the minimum VMware Hypervisor version a server must be running in order to support the deployment of a UnityVSA system?
A storage administrator attempts to restart the Management Server to resolve Unsphere issues, but is unable to do so. What is a possible reason for this issue?
The embedded FC ports allow connection at what speeds?
What is a characteristic of the iSCSI interface on Dell EMC Unity storage arrays?
Which protocols are supported by Dell EMC UnityVSA for storage provisioning?
A user is having difficulty troubleshooting a Unity storage system and the service provider has been contacted for assistance. The service provider needs to run some service commands on the Storage Processors to troubleshoot the issue further.
Which step must be taken to allow the service provider remote access to the storage system?
What is used by the Local LUN Move data mobility feature?
What types of file retention are available with the Dell EMC Unity XT family arrays?
What describes the Cutover operation for a File Import session?
What is a consideration when attempting to downgrade from Integrated ESRS Two-way to ESRS One-way?
A user is setting up Dell EMC Unity network ports for connectivity between the NAS clients and NAS Servers. In Unisphere, what can a user modify under the Access section of the Settings configuration window?
A storage administrator is considering adding another application to run on their Unity 300 but they are concerned about the application’s performance. They ask what is considered “normal” for CPU utilization. Based on Dell EMC best practices, what should be your response?
A system administrator experienced a power failure in their environment. To which device will cache de-stage?
What capability is provided by the Dell EMC CIFS Management snap-in?
What is the default NFS host access option?
What is a connectivity rule for hosts that connect to multiple Unity systems?
What is a consideration for IP Packet Reflect running on a NAS server?
When the LUN Snapshot Restore operation is performed, what does the Unity system automatically do before beginning the restoration process?
What functionality is provided to Unity from its integration with CTA?
A storage administrator is tasked with creating a DR solution for block and file storage resources. The company has multiple regional and international sites containing a mix of physical and virtual Dell EMC Unity systems.
What are considerations for the storage administrator in creating the DR solution?
What component is a hot-pluggable CRU?
An administrator wants to migrate an FLR-enabled file system with DHSM-enabled from a Dell EMC VNX array to a new Dell EMC Unity XT array.
What method should they use?
A storage administrator is required to test a new version of an application loaded on a secondary host. The administrator must use existing data contained on a LUN provisioned from a Dell EMC Unity to a primary host.
Which solution will meet the requirement and provide space efficiency?
An administrator’s Unity system is configured with both a Fibre Channel CNA and a Fibre Channel I/O module. Which Fibre Channel port on each SP must be used for native synchronous replication?
When creating a new LUN on a Dell EMC Unity array using Unisphere, what is the default setting of the Data Reduction feature?
After performing the initial configuration of a new UnityVSA, when do alerts concerning license expiration first occur?
You are implementing a new Dell EMC Unity 450F with twenty-five 7.6 TB SSD drives. You need to standardize on a RAID5 4+1 stripe size.
What needs to be done to configure a dynamic pool?
A user observes a system alert that indicates an error has occurred that the user should be aware of, but does not have significant impact on the system.
Which severity level is this alert?
How long before a license expires will UnityVSA send the first alert warning?
What is a benefit of Dell EMC Unity XT Series dynamic pools?
When defining which resources on the destination system the replicated item will use for an asynchronous session, which settings must be provided?
A storage administrator wants to configure a Unity system to log system events to a remote log server. In order to allow access to the log server, which port should the administrator ensure is not blocked by the firewall?
A Storage administrator needs to expand their FAST Cache by 400 GB. The current configuration consists of two 400 GB SAS Flash 2 drives.
What can be used to expand the FAST Cache?
What is the default MTU value for the NAS Server interface?
