HP HPE0-V26 Delta - HPE Hybrid Cloud Solutions Exam Practice Test

This is because the HPE ProLiant DL360 Gen10 server is a rack server that delivers security, agility and flexibility without compromise. It supports the Intel Xeon Scalable processor with up to a 60% performance gain and 27% increase in cores, along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB with an increase in performance of up to 82%.1 It also has a small footprint and can fit in a limited space.

According to HPE, SMU is a web-based interface that enables you to configure, monitor, and manage storage devices. It also provides performance monitoring and reporting for HPE MSA storage arrays1. With SMU, you can demonstrate the features and monitoring capabilities of the new MSA storage array to your customer.

To set the email notification option, you need to go to the “Administration” tab and select the “Management” option. Then you need to enter the email address and SMTP server information in the “AlertMail” section and enable the “AlertMail” feature. You can also specify which events you want to receive emails for by selecting the appropriate severity level.

This is because HPE GreenLake Central is an online portal that enables customers to manage and optimize their hybrid cloud environments. It provides a unified view of the costs, capacity, consumption and compliance of their on-premises GreenLake systems and their public cloud platforms such as AWS and Azure. It also offers insights and recommendations to help customers improve their IT performance, ROI and data protection.123

• RAID 0: This level has zero overhead from capacity perspective, as it uses all the available disk space for data storage without any redundancy or parity. However, it also has no fault tolerance and if one disk fails, all data is lost12.
• RAID 1: This level has capacity of one drive as overhead, as it uses disk mirroring to create an exact copy of data on two or more disks. This provides high reliability and fault tolerance, but reduces the usable disk space by half12.
• RAID 5: This level has capacity of one drive as overhead, as it uses disk striping with parity to distribute data and parity blocks across three or more disks. This provides a balance between performance and reliability, as it can tolerate one disk failure without losing data12.
• RAID 6: This level has capacity of two drives as overhead, as it uses disk striping with double parity to distribute data and two parity blocks across four or more disks. This provides higher reliability and fault tolerance than RAID 5, as it can tolerate two disk failures without losing data12.

HPE ProLiant DL560 Gen10 Server is a high-density, 4P server with high performance, scalability and reliability. It supports up to 6 TB of memory with 48 DIMM slots and up to 12 TB of memory with 96 DIMM slots when using HPE Persistent Memory2. This means that it can support a database of 5 TB to run in memory.

This is because the HPE MSA 2060 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF expansion enclosures for a maximum of 9 enclosures (10 total including the array). You can start small and scale as needed with any combination of SSDs, Enterprise SAS or MidLine SAS HDDs12.

• HPE Product Bulletin: Aides with the purchase, sale, and support of HPE solutions by providing technical overviews and specifications.
• HPE CloudPhysics: Provides data-driven insights to improve IT performance, ROI, and data protection through analysis of IT metadata.
• Solution Sales Enablement Tool: Provides curated information about HPE strategy and solutions as well as sales, marketing, and technical information aligned to specific solutions.
• HPE Seismic: Accurately size and efficiently deliver world-class solutions on HPE GreenLake Lighthouse, which powers HPE GreenLake Cloud services and HPE infrastructure.

• HPE Product Bulletin: https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04123144
• HPE CloudPhysics: https://www.hpe.com/us/en/storage/cloudphysics.html
• Solution Sales Enablement Tool: https://sset.ext.hpe.com/
• HPE Seismic: https://www.hpe.com/us/en/newsroom/blog-post/2021/02/hpe-reimagines-customer-and-partner-experience-with-software-and-data-driven-insights.html

CloudPhysics is a tool that provides a comprehensive assessment of VMware environments and helps identify opportunities for optimization and modernization. CloudPhysics can also generate a ready-to-order bill of materials for HPE solutions based on the customer’s workload requirements.

The other options do not seem to be suitable for performing an assessment of a VMware environment. OneView is a tool for managing HPE servers, storage, and networking2. GreenLake Quick Quote is a tool for creating quotes for HPE GreenLake services3. InfoSight is a tool for monitoring and managing HPE storage systems.

HPE RapidDR: This license is correct, as HPE RapidDR is a disaster recovery orchestration tool that automates the failover of a pre-configured set of virtual machines from a production site to a recovery site on HPE SimpliVity. It leverages the built-in backup and replication capabilities of HPE SimpliVity and simplifies the disaster recovery process.

HPE SimpliVity is a hyperconverged infrastructure solution that combines compute, storage, networking, and data services in a single platform. It provides high performance, efficiency, and resiliency for various workloads, including edge, VDI, and general virtualization1.

According to HPE, this server offers the 2nd generation AMD EPYC 7000 Series processor delivering up to 2X the performance of the prior generation1. It also provides built-in security and flexibility for key applications such as virtualization, software-defined storage (SDS), and High-Performance Compute (HPC)1.

According to IBM, a SAN is a dedicated network that provides access to consolidated, block-level data storage1. A SAN allows multiple servers to access shared pools of storage devices, such as disk arrays or tape libraries1. A SAN can help your customer consolidate data and add additional block-based storage to their main document management application.

HPE MSA 2060 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF expansion enclosures for a maximum of 9 enclosures (10 total including the array). This means that it can accommodate the four existing expansion enclosures from the previous solution that have different disk sizes.

The HPE MSA 2060 also delivers up to 395,000 IOPS, which is up to 80% faster than its prior generation1. This would be beneficial for a customer who wants to fully populate the controller enclosure with SSD drives, which are faster than HDD drives.

The Advanced Data service (ADS) suite LTU is a license that enables features such as snapshot, replication, performance tiering, virtual disk groups, and thin provisioning on the HPE MSA 20602. These features can enhance the performance, availability, and efficiency of the storage system.

According to HPE, the TCO/ROI Calculator is a tool that helps you compare the total cost of ownership (TCO) and return on investment (ROI) of different server solutions1. It can help you demonstrate how a server refresh can reduce costs, improve performance, and increase efficiency for your customer.

According to Simplilearn, big data storage is a new technology that allows you to store large amounts of data that exceed the capacity of typical database software tools1. Big data storage can handle various types of data, such as structured, unstructured, or semi-structured data, and provide fast and scalable access to it1.

HPE GreenLake Central is a self-service platform that gives customers a consistent cloud experience for all their applications and data, across edges, colocations, and data centers. Some of the features of HPE GreenLake Central include:

• Easily monitor cloud costs and usage: HPE GreenLake Central provides customers with visibility and control over their cloud spending and consumption across hybrid environments. Customers can view their usage and costs by service, location, application, or business unit. They can also set budgets, alerts, and policies to optimize their cloud resources and expenses.
• Grow resources as needed: HPE GreenLake Central enables customers to scale up or down their cloud services and resources as their business needs change. Customers can access a catalog of cloud services from HPE and partners through a self-service portal and order them with a few clicks. They can also leverage buffer capacity that is ready to use in minutes, not months.

• NAS: c) Sharing files over industry standard protocols such as NFSv4 or SMB.
• SAN: a) Block access using a FC protocol. or b) Block access using FCoE protocol or d) Block access using the iSCSI protocol.

According to the HPE website, NAS stands for Network Attached Storage and is a storage system that provides file-level access to data over a network. NAS devices use protocols such as NFSv4 or SMB to share files with clients. NAS devices typically have their own file system and operating system and can support multiple users and applications.

SAN stands for Storage Area Network and is a network that provides block-level access to data over a dedicated network. SAN devices use protocols such as FC, FCoE, or iSCSI to transfer blocks of data to servers. SAN devices do not have their own file system and rely on the servers to manage the data. SAN devices typically provide high performance and availability for mission-critical applications.