iSQI CTFL-AuT ISTQB Certified Tester Foundation Level - Automotive Software Tester Exam Practice Test

Activating the hazard warning lights is to be tested To do so. the flashing lights are monitored and the flashing frequency is measured and assessed.

The setting of an error memory entry in the motor control unit Is to be tested To do so, the motor temperature is Increased above the critical limit and afterwards, the subsequent error memory entry will be read and assessed.

The correct reaction of the windscreen wiper is to be tested To do so. the ram sensor Is activated by water on the screen and the windscreen wiping activities are monitored.

A cruise control is to be tested by reaching me target speed In a given time and holding this speed despite outside disturbances. Different driving scenarios are simulated for this.

Databases describe the signals of a communication channel.

Databases define the implementation of the communication protocol

Databases include information about input and output signals.

Databases can be described using ASAM-standards

Breakout box, Software-Compiler, real parts

Test case simulator, rest bus simulation, power supply

Electric error simulation, signal processing, processor simulation

Power supply, real time capable computer electric error simulation

For a MIL test environment NO environmental model is necessary

In the MIL test environment, stimulations and observations are possible anywhere via access points.

In the MIL test environment, the test object is available as compiled code and it is not readable by a human being.

In the MiL test environment, additional hardware is necessary to implement access points.

Volume 7 (ISO 26262-7)

Volume 6 (ISO 26262-6)

Volume 6 (ISO 262624)

Volume 4 (ISO 26262-4)

For integration tests SiL Mil and HiL test environments are suitable

For load and stress tests. MIL and HiL test environments are suitable

The correct classification of the test levels has no died influence on the safety relevance of the test object (with regard to ISO 26262).

For component tests, St and MiL test environments are suitable