LPI 702-100 Linux Professional Institute BSD Specialist Exam Practice Test

Compiling an application from source code allows for customization of the binary to a system’s particular needs, including optimization for specific hardware and enabling or disabling certain features. Pre-compiled binaries are quick and easy to install but they don’t allow for such customization.

References:

• Understand the difference between a pre-compiled binary and compiling from source

The command route add default 192.168.1.1 is used to set the default gateway on a BSD system. This command adds a default route to the routing table, directing traffic to the specified gateway IP address when no other route matches.

References:

• FreeBSD Handbook - Routing
• OpenBSD Change, Add or Display Default Gateway

The command cp SI 52 in the Bourne shell script copies the file named by the value of SI to the file named 52. The SI is a positional parameter that represents the first argument passed to the script when it is executed. Positional parameters are numbered from 1 to 9, and can be accessed by using the dollar sign $ followed by the number. For example, $1 is the first positional parameter, $2 is the second, and so on. Therefore, the SI in the script is equivalent to $1, and it represents the first argument passed to the script. The correct answer is D. A positional parameter. References:

• [Positional Parameters - FreeBSD]
• [Shell Scripting Tutorial - Positional Parameters]

The name of the NetBSD installation program is sysinst. It is the standard installer used by NetBSD for setting up the system on a new machine. The sysinst program guides users through the installation process, including disk partitioning, package selection, and system configuration45.

References:

• NetBSD Guide - Example installation
• NetBSD Guide - Installing NetBSD: Preliminary considerations and preparations

The excerpt C is a valid if condition in the Bourne shell because it uses the correct syntax and operators for the test command. The syntax of the if statement in the Bourne shell is:

if test-commands; then consequent-commands; [elif more-test-commands; then more-consequents;] [else alternate-consequents;] fi

The test-commands are any commands that return a status of 0 (true) or non-zero (false). The test command is a common way to perform various tests on files, strings, and numbers. The test command has the following format:

test expression

The expression consists of one or more primaries, which are unary or binary operators that evaluate to true or false. The primaries can be combined with the following operators:

! expression: Logical NOT expression -a expression: Logical AND expression -o expression: Logical OR ( expression ): Parentheses for grouping

The excerpt C uses the test command with the following expression:

“$var” = “test”

This expression tests if the value of the variable $var is equal to the string “test”. The = operator is a string comparison operator that returns true if the strings are equal. The double quotes around the variable and the string are used to prevent word splitting and globbing by the shell. The spaces around the operator are also required by the test command.

The excerpt C also uses the correct syntax for the then and fi keywords, which mark the beginning and the end of the if statement. The then keyword must be on the same line as the test command, or on a new line after a semicolon. The fi keyword must be on a new line.

The other excerpts are invalid for various reasons:

• The excerpt A uses the && operator instead of the -a operator for logical AND. The && operator is a shell operator that executes the second command only if the first command succeeds. The test command does not recognize the && operator as a valid argument. The excerpt A also uses the != operator instead of the -ne operator for numeric comparison. The != operator is a string comparison operator that returns true if the strings are not equal. The -ne operator is a numeric comparison operator that returns true if the numbers are not equal.
• The excerpt B uses the [ [ construct instead of the test command. The [ [ construct is a shell keyword that performs conditional expressions similar to the test command, but with some extensions and differences. The [ [ construct is not part of the POSIX standard and is not supported by all shells. The Bourne shell does not support the [ [ construct, and will treat it as a command name. The excerpt B also uses the wrong syntax for the then keyword, which must be on a new line or after a semicolon.
• The excerpt D uses the wrong syntax for the test command, which requires a space after the opening bracket and before the closing bracket. The excerpt D also uses the wrong syntax for the fi keyword, which must be on a new line.

In FreeBSD, theunamecommand is used to display system information. The option-vspecifically displays the version of the running operating system. This information is critical for system administrators and users who need to know the exact version of the OS they are working with, particularly when troubleshooting, updating, or configuring the system for specific software requirements.

&sektion=1&format=html

The -v or --version option of the uname command displays the version level of the operating system. This is a string that identifies the release date and patch level of the system. For example, on FreeBSD, the output would be something like:

FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:12:34 UTC 2021

This indicates that the system is running FreeBSD 13.0, with the fourth patch applied, and that the kernel was built on August 24, 2021. The version level can be useful to determine the compatibility and security of the system, as well as to report bugs or issues.

According to the BSD disklabel documentation1, the device name for a BSD disk slice consists of three parts: the disk name, the partition letter, and the slice number. The disk name is determined by the driver and the order of detection, and it usually follows the pattern of sdX, where X is a letter from a to z. The partition letter is a lowercase letter from a to p, excluding c, which is reserved for the whole disk. The slice number is a decimal number from 0 to 15, indicating the MBR partition that contains the BSD disklabel. Therefore, the device name for the first BSD disk slice in the disk label on the first partition on the second SATA disk on OpenBSD is /dev/sdlp2d, where sdl is the disk name, p is the partition letter, and 2 is the slice number.

References1: BSD disklabel - Wikipedia

The groups command is used to show the current user’s group memberships on BSD systems. The command prints the names of the primary and secondary groups that the user belongs to, separated by spaces. The primary group is the one that is assigned to new files and directories created by the user. The secondary groups are the ones that grant additional permissions or access to the user. For example, the output of groups for a user named alice might look like this:

alice wheel staff

This means that alice’s primary group is alice, and her secondary groups are wheel and staff. The wheel group is typically used for granting administrative privileges, such as using the su or sudo commands. The staff group might be used for granting access to certain resources or directories that are shared by a group of users.

The other options are either invalid commands or do not show the user’s group memberships. For example, group is not a valid command, ident is used to query an ident protocol server, showuser is not a valid command, and who is used to show who is logged on the system.

References:

• groups - FreeBSD groups(1) Manual Page1
• Group Management - FreeBSD Handbook2

To update FreeBSD, the freebsd-update fetch command is used to download available binary updates, and the freebsd-update install command is used to apply the downloaded updates to the system. These commands are part of the freebsd-update utility, which supports binary security and errata updates to the FreeBSD base system without the need for manual compilation and installation2.

References:

• FreeBSD Handbook - freebsd-update

The directories that contain start scripts for services on FreeBSD are /usr/rc.d/ and /usr/local/etc/rc.d/. The /usr/rc.d/ directory contains the system-provided scripts for the base system services, such as cron, sshd, syslogd, etc. The /usr/local/etc/rc.d/ directory contains the scripts for the additional services installed from ports or packages, such as apache, mysql, nginx, etc. These scripts follow the BSD rc.d framework, which allows for fine-grained control and customization of the startup process. The scripts are invoked by the main /etc/rc script, which sources the /etc/rc.conf file for configuration options

The ports collection on FreeBSD is a package management system that allows users to install third-party software from source or binary packages. The ports collection is stored in the /usr/ports/ directory, which contains subdirectories for different categories of software, such as archivers, databases, editors, etc. Each subdirectory contains one or more ports, which are directories that contain the files needed to build and install the software. The /usr/ports/ directory can be updated with the portsnap command34

Binary packages are pre-compiled versions of the ports that can be installed with the pkg command. Binary packages are downloaded from the FreeBSD package repository,which is hosted at pkg.freebsd.org. The packages are installed in the /usr/local/ directory by default, and the information about the installed packages is stored in the /usr/local/pkg/ directory. The /usr/local/pkg/ directory contains files with the .db extension, which are SQLite databases that store the metadata of the packages. The pkg command can query and manipulate these databases56 References: 3: 4: 5: 6: &sektion=8

The tar command is used to create or extract compressed archive files on BSD systems. It can handle various compression formats, such as gzip, bzip2, xz, and lzma. The tar command takes different options to specify the compression type, such as -z for gzip, -j for bzip2, -J for xz, and -Z for lzma. The other options are not related to compression, but to other functions of the tar command, such as -x for extracting, -c for creating, and -v for verbose output. References:

• [tar(1) - OpenBSD manual pages]
• [FreeBSD Handbook - Chapter 3. Unix Basics]
• [FreeBSD Handbook - Chapter 18. Storage]

The zpool create command is used to initialize ZFS on one or more block devices and create a storage pool. A storage pool is a collection of devices that provide physical storage and data replication for ZFS datasets. The zpool create command takes the name of the pool and the devices to be added as arguments. For example, zpool create mypool c0t0d0 c0t1d0 c0t2d0 would create a pool named mypool with three devices. The other options are either invalid or do not initialize ZFS. References: 1: page 302  2: section “Creating a ZFS Storage Pool”

The sysctl command is used to set and get kernel state variables, including the FreeBSD security level. The security level is a variable named kern.securelevel, which can have values from -1 to 3, with higher values indicating more restrictions. The security level can only be increased, not decreased, unless the system is rebooted or in single-user mode. The security level affects various operations, such as loading kernel modules, changing immutable flags on files, and modifying device nodes12 References: 1: 2: &sektion=8

The setenv command is used to set an environment variable in the csh or tcsh shell. The syntax is setenv VAR VALUE, where VAR is the name of the variable and VALUE is the value to assign to it. The TZ variable is used to specify the timezone for the shell and its subprocesses. To set the timezone to GMT (Greenwich Mean Time), the command is setenv TZ GMT. This will affect the output of commands like date and ls that display time information. The other options are either invalid syntax or belong to other shells, such as bash or sh. References:

• setenv - Linux setenv command help and examples1
• TZ - FreeBSD Environment Variables2

The file /etc/rc.conf contains values for Management Information Bases (MIBs) which are set during system startup. This file is used to configure system-wide settings, including the enabling and disabling of services, network settings, and other startup configurations2.

References:

• FreeBSD Handbook - The FreeBSD Booting Process

The mailer.conf file is used to configure the mailer programs on a BSD system. It allows the system administrator to replace the default mailer programs, such as sendmail, with alternative ones, such as postfix or exim. The mailer.conf file contains a series of entries, each consisting of a label, an equal sign, and a command. The label is the name of the default mailer program, and the command is the path to the alternative mailer program that will be executed instead. For example, to replace sendmail with postfix, the mailer.conf file should contain the following entries:

sendmail /usr/local/sbin/sendmail send-mail /usr/local/sbin/sendmail mailq /usr/local/sbin/sendmail newaliases /usr/local/sbin/sendmail hoststat /usr/local/sbin/sendmail purgestat /usr/local/sbin/sendmail

The mailer.conf file is read by the mailwrapper program, which is a binary that acts as a wrapper for the mailer programs. The mailwrapper program is installed as /usr/sbin/sendmail and /usr/libexec/sendmail/sendmail, and it invokes the appropriate mailer program based on the mailer.conf file. Therefore, to replace the system MTA with another mail server program, the mailer.conf file needs to be updated with the path to the new MTA. References:

• Chapter 31. Electronic Mail | FreeBSD Documentation Portal
• DragonFlyBSD: mta

The file /boot/loader.conf on OpenBSD is used to specify the kernel image that the bootloader should load. This file contains various settings that can be used to control the boot process, including kernel parameters and device driver options.

References:

• boot(8) - OpenBSD manual pages